Model: ZS-GC 
Product Name: Drawer-Type Single Station Pneumatic Heat Press Machine

(Voltage): 110V/220V/380V

(Power): 2500W

(Temperature Range): 0-399℃

(Time Range): 0-999ses

(Air Pressure): 8kg

(Worktable Size): 40*60cm

(Packing Size): 80*78*55cm

(Weight): 90kg 

(Features)

It is a new adavance of single station hot stamping machine.

Digital control system；PID micro computer control ensure high precision( 0.5℃）.

Digital time display ensure high precision of time.

The heat pipe connect with the heat plate,the special design of the heat plate ensure the safety and fast heat conductivity.

The pressure can be adjust,the operation is easy. So it can be widely used in flow line production.

 Excellent appearance and high work efficiency. 

(Operation Process)

Turn on the power switch,adjust the temperature,time and air pressure to the needed one.

When the temperature reached the setted one,turn the switch to “manual” begain to test.After confirm the quality is good enough,turn the switch to “automatic” start to volume-produce.

When the switch on “manual”,press the heat plate untill the temperature reached the setted one.If the stamping position is not right,press “engency stop”;when the switch on the “automatic”,push the heat plate to needed position and then it will press automatically.

(Notice)

The machine should connect with safe earth protect.

(Maintenance)

If the air pressure is too small or big,you can adjust the presure-regulating valve.(take care whether there is oil on the air bottle)

when the temperature reached the setted one but the heat plate is not hot or heat evenly,please check the connection of temperature controller and the thermocouple.

When the switch on “manul”,if it is not press,pls check the “manual” switch;when the switch on the “automatic,the bedplate is on the laction but not press,pls check the micro movement switch

If there is something wrong with the quality,pls contact with our company timely.